Control all your Fire TV Sticks from one app

Yes. Our free Fire TV Stick remote app discovers all Amazon Fire TV Stick units on your Wi-Fi network simultaneously using mDNS (_amzn-wplay._tcp). Every TV appears in the device list — tap to switch between rooms instantly. Each connection uses HTTP. Requires 4-digit PIN per TV on the first connection. No separate apps per TV, no subscription, and no limit on the number of TVs you can add.

All Amazon Fire TV Stick units on the same Wi-Fi network are discovered automatically via mDNS (_amzn-wplay._tcp) and appear in the app's device selector. Tap any to switch control instantly — the app maintains connections to all Amazon Fire TV units simultaneously so switching is immediate with no re-pairing delay. The app prompts you to complete 4-digit PIN per TV on the very first connection only. Each subsequent connection is instant.

Our free Fire TV Stick remote app supports multi-room control with no additional cost. All Amazon Fire TV Stick units on your home network are discovered simultaneously via mDNS (_amzn-wplay._tcp). You select individual TVs from the device list — no simultaneous broadcast mode, but switching between TVs is instant. Each TV connects via HTTP. Requires 4-digit PIN per TV on first launch. No subscription, no account, no limit on TV count.

The Amazon Fire TV app. Amazon publishes a Fire TV app, listed by AMZN Mobile LLC and requiring iOS 15.1 or later. It wants you signed in to the same Amazon account the device was set up with, which is the step people trip over when the device belongs to someone else in the household.

A Fire TV Stick is a dongle behind the TV with no controls on it at all. The fallback is HDMI-CEC: switch on HDMI CEC Device Control under Settings → Display & Sounds on the Fire TV itself, and your television’s own remote can drive the Stick’s power, volume and navigation. It needs a CEC-capable TV and port, and some implementations are unreliable. Reaching the Stick’s own network settings needs a working controller — its remote, the phone app, or a CEC-capable TV remote. There is no physical route in, which is why the CEC switch is worth turning on before you ever need it.

Almost always the network, and usually one of two settings. A guest SSID and router AP or client isolation both exist to stop devices on the network talking to each other — which is exactly what discovery needs to do. The phone shows full Wi-Fi and still sees nothing. Move the phone off the guest network onto the same SSID as the Stick, and turn off AP or client isolation on the router. If the physical remote is the problem instead, Amazon’s documented re-pairing move is holding Home for about ten seconds until the pairing screen appears.