A free Element TV remote app that's actually free

Yes, a phone app can control your Element TV over Wi-Fi instead of a plastic remote. Before installing one, check what you own: Element ships Roku TVs (E4AA/E4FAA, "R" suffix) and Fire TV Edition sets (EL4KAMZ) under one badge — both reachable from an iPhone over Wi-Fi, through two different protocols.

100% free basic controls. No paywall after 2 taps. No credit card. Covers both Element platforms — E4AA/E4FAA Roku TVs and EL4KAMZ Fire TV Edition.

Download Free App

No 2-tap paywalls · No credit card · Basic controls free forever

Universal TV Remote App — control your Element TV from your iPhone

4.8 ★

App Store

FREE

No paywall

16+

TV brands

One Element badge, two different smart platforms

Which Element TV you have — and how it takes commands

Element Electronics assembles televisions in Winnsboro, South Carolina, and has shipped them with two different smart platforms over the years: the current Roku TV line and an earlier Amazon Fire TV Edition line. They are controlled by completely different protocols, so the series on the model plate — not the badge on the bezel — decides which app can reach your set.

Element TV model lines, the operating system each one runs, how it is reached over the network, whether pairing is required, and where the on-set button is.
Model line / series	TV operating system	How it is controlled over the network	Pairing	On-set button
E4AA series (E4AA43R, E4AA50R, E4AA55R, E4AA58R, E4AA65R)	Roku TV	Roku ECP — HTTP on port 8060, found by SSDP	None — connects instantly	Single Roku-standard button, underside
E4FAA frameless series (E4FAA43R, E4FAA55R)	Roku TV	Roku ECP — HTTP on port 8060, found by SSDP	None — connects instantly	Single Roku-standard button, underside
EL4KAMZ series (EL4KAMZ4317, EL4KAMZ5017, EL4KAMZ5517, EL4KAMZ6517)	Amazon Fire TV Edition	Fire TV network protocol over Wi-Fi	One-time 4-digit PIN shown on the TV screen	Button row on the underside
E4STA and other standard series	Basic panel — no smart platform	None: no network stack to talk to	Not applicable	Button row on the rear or edge

The suffix is the reliable test: an "R" at the end of an E4AA/E4FAA model means Roku TV; EL4KAMZ models are Fire TV Edition. Both are reachable from a phone — but through different connection paths, and a standard (non-smart) Element panel is reachable through neither.

Reaching the menu with no remote

Which button you get depends on the series

On a Roku-series Element the network menu needs a remote or a phone, as on any Roku TV; Ethernet gets you through setup without either. On an EL4KAMZ set the Fire TV interface needs a paired input to reach Settings → Network. A standard Element panel has no network menu at all.

Known Element failure mode

An app that found one Element TV cannot see the other one

This is the two-platform badge at work, not a bug. A Roku-only tool will never discover an EL4KAMZ Fire TV Edition set, and a Fire TV-only tool will never see an E4AA Roku model. Check the model plate suffix first — the app has to match the platform, not the brand.

What helps:

100% Free Element TV Remote App

Basic Element TV controls are free forever. No paywall after 2 taps. No credit card. No subscription. Ever.

Free

No trial
No subscription

★★★★★

4.8

App Store
172+ ratings

Auto-Discovery. Zero Config.

The one free iPhone remote that covers both Element platforms. E4AA and E4FAA Roku models connect over Roku ECP (port 8060, SSDP discovery) with zero pairing; EL4KAMZ Fire TV Edition sets connect after a one-time on-screen PIN. Element itself publishes no remote app — Roku’s covers only the Roku models and Amazon’s only the Fire TV sets, so a two-Element household otherwise needs two different first-party apps. Basic controls (D-pad, OK, volume, channels) stay free forever; no ads on the free tier of these controls, no credit card, no 2-tap paywall.

How it works

Get Free Element TV Remote Control — Step by Step

Step 1

Check the model plate first

Element ships two smart platforms under one badge. An "R" suffix (E4AA43R, E4FAA55R) means Roku TV; EL4KAMZ models are Fire TV Edition. Both work with the app — through different connection paths.
Step 2

Download for free

Install the Universal TV Remote app at zero cost. No account, no credit card, no trial countdown.
Step 3

Roku models: connect instantly

On an E4AA or E4FAA set the app finds the TV by SSDP and talks Roku ECP on port 8060. No PIN, no pairing — tap the TV in the list and the D-pad is live.
Step 4

Fire TV models: confirm the PIN once

An EL4KAMZ set shows a 4-digit code on screen the first time. Type it in the app once; after that the set reconnects automatically every time.

FAQ

Frequently Asked Questions

Specific answers for Element TV users — including which Element lines run which system.

What is the best free remote app for an Element TV?

For E4AA and E4FAA Roku models, our app connects over Roku ECP on port 8060 with no pairing at all — SSDP finds the TV on your Wi-Fi in seconds. For EL4KAMZ Fire TV Edition sets it connects after a one-time 4-digit PIN shown on the TV. Element publishes no remote app of its own, so this is the one free app that covers both Element platforms.

How do I know if my Element TV is Roku or Fire TV?

Read the model plate on the back. An "R" at the end — E4AA43R, E4AA55R, E4FAA43R — means Roku TV. EL4KAMZ4317, EL4KAMZ5017, EL4KAMZ5517 and EL4KAMZ6517 are Fire TV Edition. The badge on the bezel looks the same either way; the suffix is the reliable test.

Why does the app find one Element TV but not the other?

Because they run different platforms. A Roku-only tool can never discover an EL4KAMZ Fire TV set, and a Fire TV-only tool can never see an E4AA Roku model. Our app speaks both protocols, but each TV must be on the same Wi-Fi network as your phone to be found.

Does the free version really include volume and channels?

Yes. D-pad navigation, OK, volume up/down and channel up/down are free forever on Element TVs — no trial that expires, no credit card, no paywall after two taps. Premium adds power, keyboard, touchpad and app shortcuts.

Can the app control an older non-smart Element TV?

No, and honestly no phone app can. Element’s standard panels (like the E4STA series) have no network stack, so there is nothing for an app to connect to. For those sets the physical button row on the rear is the only control without a hardware remote.

Does Element have its own remote app for this TV?

None — Element publishes no remote app for its TVs. Element does not ship a first-party remote app. The Roku models answer to Roku’s official app, the EL4KAMZ sets answer to Amazon’s Fire TV app — two different first-party apps depending on which Element you own. A universal app that speaks both protocols covers the whole badge from one place.

Where is the button on the Element TV itself, and can it reach the settings menu?

The E4AA and E4FAA Roku models follow the Roku convention — one button under the set: short press for power or the input list, long press to power off. The EL4KAMZ Fire TV sets carry a small button row on the underside, and the standard panels use a plain row on the rear. On a Roku-series Element the network menu needs a remote or a phone, as on any Roku TV; Ethernet gets you through setup without either. On an EL4KAMZ set the Fire TV interface needs a paired input to reach Settings → Network. A standard Element panel has no network menu at all.

Why would a remote app fail to find my Element TV?

A free Element TV remote app that's actually free

Which Element TV you have — and how it takes commands

Which button you get depends on the series

An app that found one Element TV cannot see the other one

Get Free Element TV Remote Control — Step by Step

Check the model plate first

Download for free

Roku models: connect instantly

Fire TV models: confirm the PIN once

Frequently Asked Questions

More free remote app guides

Ready to Ditch the Physical Remote?