Lost your Element remote? Start at the model plate.

Lost the Element remote? Your phone replaces it over Wi-Fi — D-pad, volume, inputs, typing — with no hardware to buy. First, Element ships Roku TVs (E4AA/E4FAA, "R" suffix) and Fire TV Edition sets (EL4KAMZ) under one badge — both reachable from an iPhone over Wi-Fi, through two different protocols.

Element sells Roku TVs and Fire TV Edition sets under one badge, and the replacement path is different for each. The model suffix settles which one you own before you try anything else.

Download Free App

No 2-tap paywalls · No credit card · Basic controls free forever

Universal TV Remote App — control your Element TV from your iPhone

4.8 ★

App Store

FREE

No paywall

16+

TV brands

One Element badge, two different smart platforms

Which Element TV you have — and how it takes commands

Element Electronics assembles televisions in Winnsboro, South Carolina, and has shipped them with two different smart platforms over the years: the current Roku TV line and an earlier Amazon Fire TV Edition line. They are controlled by completely different protocols, so the series on the model plate — not the badge on the bezel — decides which app can reach your set.

Element TV model lines, the operating system each one runs, how it is reached over the network, whether pairing is required, and where the on-set button is.
Model line / series	TV operating system	How it is controlled over the network	Pairing	On-set button
E4AA series (E4AA43R, E4AA50R, E4AA55R, E4AA58R, E4AA65R)	Roku TV	Roku ECP — HTTP on port 8060, found by SSDP	None — connects instantly	Single Roku-standard button, underside
E4FAA frameless series (E4FAA43R, E4FAA55R)	Roku TV	Roku ECP — HTTP on port 8060, found by SSDP	None — connects instantly	Single Roku-standard button, underside
EL4KAMZ series (EL4KAMZ4317, EL4KAMZ5017, EL4KAMZ5517, EL4KAMZ6517)	Amazon Fire TV Edition	Fire TV network protocol over Wi-Fi	One-time 4-digit PIN shown on the TV screen	Button row on the underside
E4STA and other standard series	Basic panel — no smart platform	None: no network stack to talk to	Not applicable	Button row on the rear or edge

The suffix is the reliable test: an "R" at the end of an E4AA/E4FAA model means Roku TV; EL4KAMZ models are Fire TV Edition. Both are reachable from a phone — but through different connection paths, and a standard (non-smart) Element panel is reachable through neither.

Reaching the menu with no remote

Which button you get depends on the series

On a Roku-series Element the network menu needs a remote or a phone, as on any Roku TV; Ethernet gets you through setup without either. On an EL4KAMZ set the Fire TV interface needs a paired input to reach Settings → Network. A standard Element panel has no network menu at all.

Known Element failure mode

An app that found one Element TV cannot see the other one

This is the two-platform badge at work, not a bug. A Roku-only tool will never discover an EL4KAMZ Fire TV Edition set, and a Fire TV-only tool will never see an E4AA Roku model. Check the model plate suffix first — the app has to match the platform, not the brand.

What helps:

Complete Element TV Remote Replacement

Every function of your lost Element TV remote — volume, navigation, HDMI switching, app launching — now on your iPhone over Wi-Fi.

Free

No trial
No subscription

★★★★★

4.8

App Store
172+ ratings

Auto-Discovery. Zero Config.

Replacing a lost Element remote depends on the series: E4AA/E4FAA Roku models accept an iPhone instantly over Roku ECP with no pairing; EL4KAMZ Fire TV Edition sets ask for a one-time on-screen PIN; E4STA and basic panels have no network stack, so their only no-remote control is the physical button row. Element publishes no remote app of its own — the phone app replaces a $15–$20 replacement remote and three days of waiting with a 30-second setup, and the basic controls stay free forever.

How it works

Control Your Element TV Without a Remote

Step 1

Read the suffix on the model plate

On the back of the set: E4AA/E4FAA ending in "R" is a Roku TV; EL4KAMZ is Fire TV Edition; E4STA and plain series are basic panels with no network path.
Step 2

Roku models: your iPhone takes over now

Install the free app, join the TV’s Wi-Fi, tap the set when SSDP finds it. Roku ECP needs no pairing, so a lost remote costs you about 30 seconds.
Step 3

Fire TV models: you need the PIN once

An EL4KAMZ set shows a 4-digit code on screen for the first connection. If the TV is already on and on Wi-Fi, that is the whole procedure — no hardware remote involved.
Step 4

No Wi-Fi configured? Use the panel button and Ethernet

A Roku-series Element with no network needs either its single panel button (short press: power/input; long press: power off) or a temporary Ethernet cable to get through setup — then the phone takes over.

FAQ

Frequently Asked Questions

Specific answers for Element TV users — including which Element lines run which system.

I lost my Element TV remote — can my iPhone replace it?

On a Roku-series Element (E4AA43R, E4AA55R, E4FAA43R and similar) — yes, immediately: the free app finds the TV over Wi-Fi and needs no pairing. On an EL4KAMZ Fire TV Edition set — yes, after typing a 4-digit PIN the TV shows once. On a basic Element panel — no app can help; use the rear button row.

My Element TV is not connected to Wi-Fi and the remote is gone. What now?

On a Roku model, either use the single panel button (short press cycles power and input) or plug in Ethernet temporarily — a Roku TV on a wired network becomes reachable by the app, and you can then join it to Wi-Fi from your phone. This is the standard recovery path for any Roku TV with a lost remote.

Does Element sell replacement remotes?

Third-party replacements for both series are sold online for roughly $10–$20, but check which one you need: a Roku-style remote for E4AA/E4FAA models, a Fire TV-style one for EL4KAMZ. The app costs nothing and works for both, so it is worth trying before ordering plastic.

Will the app power the TV on after I lost the remote?

If the TV is on standby with Wi-Fi already configured, a Roku-series Element responds to wake commands over the network. If the set was fully unplugged or never joined Wi-Fi, use the panel button once to power it on, then the phone handles everything else.

Which Element models can the app NOT rescue?

The standard, non-smart panels — the E4STA series and the plain HD/FHD sets. They have no network hardware, so no app on any phone can reach them. For those, a universal infrared remote or the panel buttons are the only options; an iPhone has no IR emitter.

Does Element have its own remote app for this TV?

None — Element publishes no remote app for its TVs. Element does not ship a first-party remote app. The Roku models answer to Roku’s official app, the EL4KAMZ sets answer to Amazon’s Fire TV app — two different first-party apps depending on which Element you own. A universal app that speaks both protocols covers the whole badge from one place.

Where is the button on the Element TV itself, and can it reach the settings menu?

The E4AA and E4FAA Roku models follow the Roku convention — one button under the set: short press for power or the input list, long press to power off. The EL4KAMZ Fire TV sets carry a small button row on the underside, and the standard panels use a plain row on the rear. On a Roku-series Element the network menu needs a remote or a phone, as on any Roku TV; Ethernet gets you through setup without either. On an EL4KAMZ set the Fire TV interface needs a paired input to reach Settings → Network. A standard Element panel has no network menu at all.

Why would a remote app fail to find my Element TV?

Lost your Element remote? Start at the model plate.

Which Element TV you have — and how it takes commands

Which button you get depends on the series

An app that found one Element TV cannot see the other one

Control Your Element TV Without a Remote

Read the suffix on the model plate

Roku models: your iPhone takes over now

Fire TV models: you need the PIN once

No Wi-Fi configured? Use the panel button and Ethernet

Frequently Asked Questions

More lost remote guides

Ready to Ditch the Physical Remote?