Control all your Samsung TVs from one app

Every Samsung TV in the house appears in one app, and switching rooms is one tap. The detail that matters: every current Samsung runs Tizen, so the blocker is rarely the protocol — it is the Allow prompt the TV puts on screen the first time a phone tries to connect.

The Frame in the living room, Crystal UHD in the bedroom — approve each TV once and switch between them instantly. 100% free multi-TV control.

Download Free App

No 2-tap paywalls · No credit card · Basic controls free forever

Universal TV Remote App — control your Samsung TV from your iPhone

4.8 ★

App Store

FREE

No paywall

16+

TV brands

One OS, one app, one on-screen prompt

Which Samsung TV you have — and how it takes commands

Samsung is the simple case: every current set runs Tizen, from entry Crystal UHD through QLED, Neo QLED, The Frame and the OLED S-series, and Samsung promises up to seven years of software updates on current models. The complication is not the platform — it is the permission prompt the TV shows before it will accept a phone.

Samsung TV model lines, the operating system each one runs, how it is reached over the network, whether pairing is required, and where the on-set button is.
Model line / series	TV operating system	How it is controlled over the network	Pairing	On-set button
Crystal UHD (entry 4K LED)	Tizen	WebSocket over HTTPS on port 8002, found by SSDP	Accept the prompt on the TV screen	Jog controller, rear panel bottom-right
QLED / Neo QLED (QN Mini-LED)	Tizen	WebSocket over HTTPS on port 8002, found by SSDP	Accept the prompt on the TV screen	Jog controller, rear panel bottom-right
The Frame / Frame Pro	Tizen	WebSocket over HTTPS on port 8002, found by SSDP	Accept the prompt on the TV screen	Jog controller, rear panel centre
OLED S-series (S95 / S90 / S85)	Tizen	WebSocket over HTTPS on port 8002, found by SSDP	Accept the prompt on the TV screen	Jog controller, rear panel bottom-right
2016–2019 models	Tizen (older builds)	WebSocket over HTTPS on port 8002, found by SSDP	Accept the prompt on the TV screen	Button under the logo, front lower bezel centre

Samsung retired the standalone Smart View app in October 2020 and folded its remote and casting features into SmartThings. Sets from 2011 to 2015 lost mobile remote support altogether in that move.

Reaching the menu with no remote

A jog controller, not a button

The jog controller opens the on-screen Control Menu, which is enough to reach network settings without a remote — the one on-panel control on this list that genuinely gets you into the menu.

Known Samsung failure mode

SmartThings will not add the TV

Samsung documents four separate causes, and they are easy to mistake for one another: phone and TV not genuinely on the same network — a mesh that splits 2.4 and 5 GHz can look identical and behave differently; the TV and app not signed in to the same Samsung account; Local Network permission not granted to the app on iPhone; and, on 2016 and later sets, an Allow prompt on the TV screen that has to be accepted.

What helps: Work through them in that order. The Allow prompt is the awkward one when the remote is dead — use the jog controller on the rear panel to accept it.

All Your Samsung TVs in One App

Add every Samsung TV in your home and switch between rooms in one tap. Multi-TV control at zero cost.

Free

No trial
No subscription

★★★★★

4.8

App Store
170+ ratings

Auto-Discovery. Zero Config.

Samsung’s Tizen TVs authorize phones with an on-screen “Allow this device?” prompt instead of a PIN — you approve each TV once, it issues your phone a trust token, and from then on that set connects silently. In a multi-Samsung home (a Frame in the living room, a QLED in the den, a Crystal UHD in the bedroom) the app discovers every Tizen set on your Wi-Fi via SSDP and keeps them all in one room-named list; control runs over WebSocket HTTPS on port 8002, entirely on your local network. One Samsung quirk worth knowing: if you ever hit “connection refused”, someone pressed Deny on that TV — clear it in Settings → General → External Device Manager → Device Connection Manager and approve again. No cloud login, no per-TV subscription.

How it works

Control Every Samsung TV in Your Home

Step 1

Download the App

Install the Universal TV Remote app for free. One app handles every Samsung Tizen TV in your home.

Step 2

Connect to Home Wi-Fi

Make sure your phone is on the same Wi-Fi network as all your Samsung TVs.

Step 3

Approve Each Samsung TV Once

Select a TV — it shows an “Allow this device?” prompt on screen. Press Allow with any working remote or the TV’s joystick button; that TV then trusts your phone.

Step 4

Switch TVs in One Tap

Every approved Samsung TV stays in the device list, named by room. Tap one to control it — no new prompts when you switch.

FAQ

Frequently Asked Questions

Specific answers for Samsung TV users — including which Samsung lines run which system.

Can I control multiple Samsung TVs from one iPhone app?

Yes. Our free Samsung remote app discovers every Tizen TV on your Wi-Fi network via SSDP and keeps them all in one device list. The first time you connect to each TV, that set shows an “Allow this device?” prompt on its screen — approve it once (with any working remote or the joystick button under the Samsung logo) and the TV permanently trusts your phone. After that, switching between rooms is one tap with no new prompts. No limit on TV count, and multi-TV control is completely free.

What if I pressed Deny on one of my Samsung TVs by mistake?

That TV will refuse the app until you clear the block — a Samsung-specific quirk the other brands don’t have. On the affected TV go to Settings → General → External Device Manager → Device Connection Manager → Device List, remove or re-allow your phone, then connect again and press Allow this time. The other Samsung TVs in your home are unaffected: each Tizen set stores its own allow/deny decision independently.

Does one free app cover different Samsung models — The Frame, QLED, Crystal UHD?

Yes. Every Samsung smart TV on Tizen (2016 and newer — The Frame, QLED, Neo QLED, Crystal UHD, The Serif) speaks the same local WebSocket protocol on port 8002, so one app controls the whole mix; each set just shows its own one-time Allow prompt. Honest limits: control works only on your home Wi-Fi (no away-from-home control), and pre-2016 Samsung sets on the old Orsay platform are not supported.

Does Samsung have its own remote app for this TV?

SmartThings. Samsung’s own route is SmartThings, which absorbed Smart View in 2020. It wants the TV and the phone signed in to the same Samsung account, and on iPhone it needs Local Network permission granted or it cannot see the TV at all.

Where is the button on the Samsung TV itself, and can it reach the settings menu?

Recent Samsungs carry a multi-directional jog stick on the rear panel, bottom-right as you face the screen — centre on The Frame. Tilt up and down for volume or menu movement, left and right for channel and input, press to select, and hold the centre to power off. Sets from 2016 to 2019 instead put a single button on the front lower bezel under the logo. The jog controller opens the on-screen Control Menu, which is enough to reach network settings without a remote — the one on-panel control on this list that genuinely gets you into the menu.

Why would a remote app fail to find my Samsung TV?