Turn your iPhone into a free wireless remote replacement for Sanyo Roku TV. Connects over HTTP REST (Roku ECP) (port 8060) via SSDP auto-discovery. No PIN or pairing code — instant connection. No batteries, no hardware, no paywalls.
Download Free AppSanyo in the US is a Funai line sold at Walmart
Funai Corporation holds the North American licence for the Sanyo name, alongside Philips, Magnavox and Emerson — which is why a Sanyo and a US Philips behave identically: they are the same company’s Roku TVs with different badges. Sanyo Roku TVs are sold through Walmart, and the model numbers begin FW.
| Model line / series | TV operating system | How it is controlled over the network | Pairing | On-set button |
|---|---|---|---|---|
| FW32 series (e.g. FW32R19F) | Roku TV — 32", 1366×768 | Roku ECP — HTTP on port 8060, found by SSDP | None on most units | Single Roku-standard button, underside or rear |
| FW65 series (e.g. FW65R70F) | Roku TV — 4K UHD with HDR | Roku ECP — HTTP on port 8060, found by SSDP | None on most units | Single Roku-standard button, underside or rear |
| Pre-Roku Sanyo sets | Sanyo’s own menu system — not Roku | Many have no network stack at all | Not applicable | Button row on the rear or edge |
Funai launched the first Sanyo Roku TV only recently. Sanyo sets that predate it are not Roku TVs, and many were never network-connected at all — a Wi-Fi app has nothing to find on those.
Reaching the menu with no remote
FW-series Sanyos follow the Roku convention: one button under the panel or on the rear. Short press powers on when the set is off; when it is on, short press opens the Input List and a long press powers down. Older non-Roku Sanyos instead carry a full button row, because there is no on-screen system to drive.
On an FW Roku TV the network menu needs a remote or a phone — Ethernet is the way through first-time setup without either. On a pre-Roku Sanyo the button row is the whole interface and there is no network menu to reach.
Known Sanyo failure mode
The first thing to rule out on a Sanyo is age. Funai’s Roku line is recent; a Sanyo bought before it runs Funai’s own menu system and, on many models, has no network hardware to discover. No amount of router troubleshooting will make a non-networked panel appear.
What helps: Check the model plate for the FW prefix and look for a Roku logo at boot. If it is an FW Roku set, the usual Roku causes apply — Control by mobile apps under Settings → System → Advanced system settings, and AP isolation on the router blocking SSDP. If it is not, infrared is the only route in.
Step-by-step guides
Each guide walks you through the exact fix — with a free iPhone app as the solution.
Lost your Sanyo TV remote?
Lost your Sanyo TV remote? Our free app replaces it over Wi-Fi in 30 seconds. Works on Sanyo Roku TVs. Basic controls always free—no 2-tap paywalls.
Sanyo TV remote not working?
Sanyo TV remote stopped responding? Our free app is a 30-second fix over Wi-Fi. Works on Sanyo Roku TVs. No paywalls, no credit card—basic controls always free.
A free Sanyo TV remote app that's actually free
Looking for a free Sanyo TV remote app that stays free? Basic Roku controls are 100% free forever. No paywall after 2 taps. No credit card. Works on Sanyo Roku TVs.
Sanyo remote dead from a drained battery?
Sanyo TV remote battery dead? Your phone never runs out. Control your Sanyo Roku TV over Wi-Fi with our free app—no batteries ever needed again.
Control all your Sanyo TVs from one app
Multiple Sanyo TVs at home? One free app controls all of them. Switch between rooms in one tap. No paywalls, no per-TV fees.
Related guides
Sanyo and these brands share the Roku OS platform — one app controls all.
Free download
Works with Sanyo Roku TV over your home Wi-Fi using HTTP REST (Roku ECP) (port 8060). No pairing code required. No account, no subscription, no hardware.
Download Free AppAvailable for iOS & Android